Green silicon carbide micropowder refers to micron-sized silicon carbide powder that is ultrafinely pulverized and classified by JZFZ equipment. Concentrated and uniform particle size distribution, high purity, large crystals, high thermal shock stability and load softening temperature, good self-sharpening and excellent grinding and polishing performance, crystal structure, high hardness, strong cutting ability , stable chemical properties, good thermal conductivity, is a very good abrasive, and is also a good non-metallic raw material. Although the performance of this abrasive product is very good, there is a not very big shortcoming, that is, in the packaging Sometimes it is easy to be squeezed into a ball, so how to solve this problem?
Whether it is in production, transportation or packaging and storage, you need to pay special attention to the following points to avoid this problem: 1.
Avoid moisture: green silicon carbide micropowder has strong hygroscopicity, and it is very easy to be damp and agglomerated in the air, and disperse Reduce the viscosity, reduce the viscosity of the slurry, and form pseudo particles and agglomerates in the slurry, resulting in a decrease in cutting efficiency and cutting quality. Therefore, do not expose it to the air for too long.
2. Unloading: There are also specific requirements for workers when unloading:
1. Before feeding, knock off the floating sand on the bag mouth and the surface of the bag to avoid bringing sundries into the unloading.
2. Before using the green silicon carbide micropowder, check whether the material bag is intact and not damaged. If there is any damage, it must be stored separately and not used again; the pouring needs to
have special requirements for the workers in the process of preparing the mortar: when pouring, it should be Pour slowly, control one bag within 2.5-3 minutes, avoid violent pouring, which will cause the powder to sink to the bottom and agglomerate and cannot be stirred, resulting in inconsistency with the actual ratio and affecting cutting.
The above are the special requirements for the storage of green silicon carbide micropowder. Doing the above points can effectively prevent the product from forming agglomerates and ensure the use effect of the product.
